6.0x2000mm Steel Coil Slitting Line

6.0x2000mm Steel Coil Slitting Line is for slitting the mother steel coil to be strips and then recoiling to be some small steel coils. It can continuously run and has a high working efficiency.

We can especially design and manufacture the machine according to customers’ specific technical requirements.

A. Raw material

1.      Suitable material:  galvanized, hot-rolled and cold rolled panel

2.      Stress:   σ_s≤345Mpa   σ_b≤600Mpa

3.      Thickness:    1.0～6.0mm

4.      Coil width:    800～2000mm

5.      Coil ID:       Φ508+10-40、Φ610+10-40、Φ762+10-40

6.      Coil OD:      Φ1000～Φ1800mm

7.      Decoiler capacity:    ≤25T

B. Product parameter

1.      Finished product quantity(excluding wasted edges):

         1.0mm≤thickness≤4.5mm, Max. 15 pcs

          4.5mm≤thickness≤6.0mm, Max. 8 pcs

2.      Width:                          ≥60mm

3.      Width tolerance:       ≤±0.1mm

4.      Recoiler I.D:               Φ508mm

5.      Recoiler O.D:          ≤Φ1800mm

6.      Recoiling capacity:      ≤25T

C. Equipment parameter

1.      Slitting speed: ≤60m/min

2.      Power source: 380V, 60Hz, 3P, 5wire

3.      Total power:    220kw

4.      Main driving motor:

5       rollers leveling machine motor    AC18.5kw

                         Slitter motor:                   DC90kw

                              Recoiler:                       DC90kw

5.      Machine size(L×W): about 36m×10m

6.      Direction: Feeding from left, and output to right (From The Operation Side)

7.      Machine color: according to customer’s requirement

8.      Operator requirement: 1 technical worker and 2 common workers

Coil feeding → Decoiling → leveling →Head cutting → Conveying → Guiding →Slitting →Conveying → Tensioning → Recoiling → Output

6.0x2000mm Steel Coil Slitting Line is mainly used to level the sheet and slit sheet according to customer’s requirement and then recoil the strips. The detail components of this machine please refer to below.

Packaging Details

1. Five *40GP containers for loading one set of the machine.

2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film;

3. Spare parts and some small parts packed in wooden box;

4. All Components Fixed by steel wire with Container. Suitable for long time sea shipping.